China Produced Price ISO13918 M16 M19 M25 SD Shear Stud Connectors
What are shear connectors?
Shear connectors also called shear studs, concrete anchors, are used in composite steel construction to tie the concrete to steel members and resist shear forces between the concrete slab and steel members. They are widely used in steel building, bridges etc. Welding Through Metal Deck are available for this stud, for this option, special ceramic ferrule type UFT are recommended.
Split pins are among the cheapest and most widely used locking fasteners for low speed, low stress parts. They may be found in a myriad of applications ranging from brake disc locks on heavy vehicles to paper puppet and plush toy joints. Also known as cotter pins, these fasteners are available in a range of sizes and designs including straight pins, spring pins, and hammer lock pins. There are also different cross section profiles available such as round, flat or half round. The split pin is also available with different end profiles including bevel ends, miter ends, and extended prong pins all of which are suited to specific uses.
Materials used in split pin manufacture tend to be soft, malleable metals such as aluminum, bronze, brass, and mild steel. This makes for easy bending of the legs when locking the pin in place. Unfortunately it also means the legs will only survive being bent once or twice before they break off. For this reason, split pins should only be used once and then discarded; this is quite acceptable when considering the low cost of these versatile little fasteners.
Size
Applications
Part of the beauty of using split pins as fasteners is their sheer simplicity. Once the part to be locked is in place, the pin is pushed through an adjacent locking hole until the end loop or eyelet stops it going in any further. One or both legs are then bent back to stop the pin from working loose, thereby effectively preventing the part from exiting its housing or coming off the shaft. There are some split pin designs, such as the spring pin, which are a little more sophisticated though. These pins feature spring steel construction and a “belly” profile in one of the legs which locks around the outside surface of round shafts.
One of the well known uses of the split pin is the locking mechanism for the castellated nuts commonly used on automobile hubs. These lightweight nuts lock the hubs in place and exert an appropriate amount of torque on the wheel bearings. They feature a series of raised tabs along their upper edges reminiscent of castle battlements. The stub axle has a hole drilled through it, and once the nut is tightened to the correct torque, the split pin is inserted through the hole between the tabs on the nut. The ends are then bent backward to lock the pin and prevent the castellated nut from loosening.
Product Parameters
Product name | ISO 13918 SD Shear Connector |
Standard | ISO |
Thread | N/A |
Material | carbon steel, alloy steel, stainless steel |
Finish | Primary color |
Packing | bulk in cartons (25kg Max.)+wood Pallet or according to customer special demand |
Leading Time | 20-30 days or based on order required |
①,a°≈140°±7° ②,The minimum of L2 is approximately three times d. is approximately three times d. |
①,Inch:7/16-20 UNF-2B [ASME B 1.1] ②,Material: Steel with a carbon mass fraction not exceeding 0.25% , Other types of steel by agreement |