2021 High quality Split Cotter Pin - Factory Supplier Carbon Steel Grade 4.8 8.8 DIN125 Galvanized Zinc Plated Flat Fender Washers – Qijing
2021 High quality Split Cotter Pin - Factory Supplier Carbon Steel Grade 4.8 8.8 DIN125 Galvanized Zinc Plated Flat Fender Washers – Qijing Detail:
What is a fender washer?
A fender washer is a flat washer with a larger outer diameter in proportion to its center hole. They are made from a thinner gauge metal than most flat washers and are designed to spread the load on thin sheet metal. Interestingly, they are named after their use on automobile fenders. Often used in sheet metal, plumbing, and electrical work. Zinc plated.
Size
Applications
Named for their common use on car fenders, fender washers are flat washers with a small hole and comparatively large outside diameter. Application: Used to distribute force over a large surface area—usually thin metal.
Surface treatments
▲Black plated
Black is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention. Blackening is a common method for metal heat treatment. The principle is to make an oxide film on the metal surface to isolate the air and achieve rust prevention.
▲Zinc coated
Electro-galvanizing is a traditional metal coating treatment technology that provides basic corrosion resistance to metal surfaces. The main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating.
▲HDG
he main advantages are good solderability and suitable contact resistance. Due to its good lubrication properties, cadmium plating is commonly used in aviation, aerospace, marine, and radio and electronic products. The plating layer protects the steel substrate from both mechanical and chemical protection, so its corrosion resistance is much better than zinc plating. Hot-dip zinc has good corrosion resistance, sacrificial protection for steel substrates, high weather resistance, and resistance to salt water erosion. It is suitable for chemical plants, refineries and coastal and offshore operating platforms.
Product Parameters
| Product Name: | Fender Washers |
| Grade: | 4.8-10.9 |
| Size: | M4–M100 |
| Surface treament: | Black, zinc plated, zinc(yellow)plated, H.D.G, Dacroment |
| Material: | Carbon steel, stainless steel, alloy steel or as per the customer requirements |
Company Information
Vision and goals
Production Line
factory real shot
factory equipment
Packaging and Shipment
Our Market
Our Customers
Product detail pictures:
Related Product Guide:
All we do is always involved with our tenet " Consumer initial, Trust first, devoting within the food stuff packaging and environmental defense for 2021 High quality Split Cotter Pin - Factory Supplier Carbon Steel Grade 4.8 8.8 DIN125 Galvanized Zinc Plated Flat Fender Washers – Qijing, The product will supply to all over the world, such as: Washington, Greek, French, Due to our dedication, our products are well known throughout the world and our export volume continuously grows every year. We will continue to strive for excellence by providing high quality products that will exceed the expectation of our customers.
By Helen from Benin - 2018.12.11 14:13
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Julia from Namibia - 2018.12.11 11:26
